R5
Jump to navigation
Jump to search
The R5 is a mid-tier MOTOTRBO portable two-way radio that replaced the DP2000e series (see the model equivalent table).[1]
Key Features[1]
The key features of this radio include:
- 64 channel capacity on the non-display model and 256 channels on the display model.
- Available as a VHF or UHF model.
- Integrated GNSS receiver for location tracking.°
- DMR Tier 2 and analogue support including Select-5, MDC1200 and QCII.
- 38mm 132 x 48px - display model.
- Uses the same audio accessories and charger as the DP2000e did.
- Acoustic feedback suppression.
- SINC+ Noise Suppression.
- AI-trained Noise Suppression.
- Intelligent Audio.
- Up to 106dB phons loudness (using the load audio profile).
- Up to 32 hours battery life in digital mode when used with a 3200mAh PMNN4889A and a 5/5/90 profile.
- IP67 dust-tight and waterproof.
- TIA4950 option.
- MIL‑STD 810H ruggedness.
The radio supports Dual Capacity Direct Mode, Conventional and IP Site Connect operation as standard - with Capacity Plus and Multisite Capacity Plus operation as an option (requires a CfS licence). This model does not support Capacity Max operation.
Although the radio currently supports Basic and Enhanced Privacy, it does not support AES-256.
° GNSS is supported in the EMEA limited keypad model, see Feature Differences below.
Specifications
| Parameter | Value | Note |
|---|---|---|
| Transmitter | ||
| Frequency | 136-174MHz (VHF) or 400-527MHz (UHF) | |
| Maximum TX Power | 5W (VHF) or 4W (UHF) | |
| Channel Spacing | 12,5kHz; 20kHz or 25kHz | 20 and 25kHz only available in analogue mode |
| Display | 132 x 48 px 1.5” monochrome | |
| Dimensions (h x w x d) | 122 x 56 x 35 mm | Depends on the battery used. |
| Weight | 285g | Depends on the battery used. |
| Operating Temperature | -20°C to +60°C | |
| ITU modulation code | 7K60F1W | Applicable to voice and data in digital mode. |
| Digital Protocol | ETSI TS 102 361-1, -2, -3 (DMR Tier II) | |
| Conducted/Radiated Emissions | -36 dBm <1 GHz; -30 dBm >1 GHz | Per TIA603E |
| Adjacent Channel Power | 60dB at 12,5kHz and 70dB at 20/25kHz | |
| Frequency Stability | ±0,5 ppm | |
| Analogue (FM) Modulation Limiting | ±2,5kHz with 12,5kHz channel spacing
±4,0kHz with 20kHz channel spacing ±5,0kHz with 25kHz channel spacing |
Only applicable in analogue mode. |
| Receiver | ||
| Receiver Sensitivity | -123dBm for 12dB SINAD¹
-124dBm for 5% BER² |
¹ In analogue mode
² In digital mode |
| Intermodulation Rejection | 70dB | Per TIA603E |
| Adjacent Channel Selectivity | 60dB at 12,5kHz
70dB at 20/25kHz |
TIA603A (single tone) |
| Adjacent Channel Selectivity | 45dB at 12,5kHz
70dB at 20/25kHz |
TIA603A (two tone) |
| Spurious Rejection | 70dB | Per TIA603E |
| Frequency Stability | ±0,5 ppm | |
| GNSS (See Differences) | ||
| Constellation Support | GPS, GLONASS, BeiDou, Galileo | |
| Time To First Fix, Cold Start | ≤60 seconds | |
| Time To First Fix, Hot Start | ≤10 seconds | |
| Horizontal Accuracy | <5 m | |
| Audio | ||
| Digital Vocoder Type | AMBE+2™ | |
| Analogue (FM) Hum and Noise | -40 dB at 12,5kHz
-45 dB at 20/25kHz |
|
| Audio Response | Between +1 and -3dB | Per TIA603E |
| Audio Output Power | 1W rated
3W maximum |
|
| Audio Distortion | ≤3% | At 1W (Rated) Audio Output |
| Default Maximum Speech Loudness | 101dB phon | measured at 30cm and per ISO532B |
| Maximum Speech Loudness | 106 phon @ 30 cm | In Digital Mode with User Selectable Audio Profile Level 3 |
| Environmental | ||
| Operating temperature | -30 °C to 60 °C | Radio only. Depends on battery. |
| Storage temperature | -40 °C to 85 °C | |
| Electrostatic Discharge | IEC 61000-4-2 Level 4 | |
| Dust and Water Intrusion | IP67 | |
| HAZLOC Certification | ANSI/TIA4950 Class I, II, III, Division 1, Groups C, D, E, F, G, Division 2, Groups A, B, C, D | When properly equipped with Motorola UL Approved battery |
| Military Standards | MIL-STD 810H | |
For an explanation of what each of the above means, see this post.
EMEA Models
| Model Number | Description |
|---|---|
| MDH07JDC9VA1AN | R5 Non-keypad VHF |
| MDH07RDC9VA1AN | R5 Non-keypad UHF |
| MDH07JDH9WA1AN | R5 Limited-keypad VHF |
| MDH07RDH9WA1AN | R5 Limited-keypad UHF |
Accessories
| Part Number | Description |
|---|---|
| Antennas | |
| PMAE4079A | UHF whip 403-527MHz 15cm |
| PMAE4069A | UHF stubby 400-450MHz 9cm |
| PMAE4070A | UHF stubby 440-490MHz 9cm |
| PMAE4071A | UHF stubby 470-527MHz 9cm |
| PMAD4116A | VHF helical 144-165MHz 15cm |
| PMAD4117A | VHF helical 136-155MHz 15cm |
| PMAD4118A | VHF helical 152-174MHz 15cm |
| PMAD4119A | VHF stubby 136-148MHz 9cm |
| PMAD4120A | VHF stubby 146-160MHz 9cm |
| PMAD4121A | VHF stubby 160-174MHz 9cm |
| PMAD4147A | VHF whip 136-174MHz 20cm |
| Batteries | |
| PMNN4878A | Li-Ion 2400mAh |
| PMNN4888A | Li-Ion IMPRES 2200mAh |
| PMNN4889A | Li-Ion IMPRES 3200mAh |
| PMNN4890A | Li-Ion TIA4950 3200mAh |
| Chargers | |
| PMPN4572A | IMPRES2 single desktop UK |
| PMPN4577A | IMPRES2 single desktop EU |
| PMPN4576A | IMPRES2 single desktop US |
| PMPN4527A | Pocket, part of PMPN4572A; PMPN4577A and PMPN4576A. |
| PMPN4290A | IMPRES2 6-way 1 display UK |
| PMPN4289A | IMPRES2 6-way 1 display EU |
| PMPN4284A | IMPRES2 6-way 1 display US |
| PMPN4283A | Base for PMPN4290A; PMPN4289A and PMPN4284A. |
| BR000272A01 | Wall mount bracket for PMPN4290A; PMPN4289A and PMPN4284A. |
| AS000129A01 | Adapter for PMPN4283A |
| NNTN7616A | IMPRES Vehicle Charger |
| NNTN8525B | Travel Charger with VPA Adapter |
| Programming/Service | |
| PMKN4115A | Programming Cable |
| PMKN4117B | programming/Test Cable |
| Carry | |
| PMLN8662A | Hard leather carry case with 3" with swivel belt loop for the limited keypad model |
| PMLN8663A | Hard leather carry case with 3" with fixed belt loop for the limited keypad model |
| PMLN8664A | Nylon carry case with 3" fixed belt loop for the limited keypad model. |
| PMLN8665A | Hard leather carry case with 3" with swivel belt loop for the non-keypad model |
| PMLN8666A | Hard leather carry case with 3" with fixed belt loop for the non-keypad model |
| PMLN8667A | Nylon carry case with 3" fixed belt loop for the non-keypad model. |
| HLN9985A | Waterproof bag |
| RLN6486A | Fireman's radio strap |
| RLN6487A | Fireman's radio strap XL |
| RLN6488A | Anti-sway strap |
| NTN5243A | Strap |
| Selected Audio Accessories | |
| PMLN6754A | IMPRES 3-wire surveillance kit in black. |
| PMLN7655A | IMPRES 3-wire surveillance kit in beige. |
| PMMN4071A | IMPRES RSM large with 3,5mm jack |
| PMMN4108A | IMPRES RSM windporting |
| PMMN4170A | IMPRES RSM RM560 |
| PMMN4171A | IMPRES RM530 |
| PMLN7565A | Over the head headset slim TIA4950 |
| This list is not exhaustive! | |
| RFID / NFC | |
| PMLN8671A | NFC kit |
| PMLN8672A | EU RFID kit |
Feature Differences
Like the R7, R2 and ION, the same model name is used in all regions of the world. There are differences between R5 radio models sold in different parts of the world, these differences include:
- The model number prefix is different. For example, EMEA models have a MD prefix.
- The regulatory labelling is different. For example, EMEA models will have CE and UKCA markings.
- Although the radio is known as R5 in all regions, there are also some differences feature-wise between, for example, the R5 sold in North America and the R5 sold in EMEA and Asia. There are also some less obvious differences between the limited key and and non-keypad model. The below tables summarize these feature differences.
| EMEA | APAC[2] | LA[3] | NA[4] | |
|---|---|---|---|---|
| GNSS | Yes | No | Yes | No |
| Bluetooth | No | No | Yes | Yes |
| Wi-Fi | No | No | Yes | Yes |
| EMEA | APAC[2] | LA[3] | NA[4] | |
|---|---|---|---|---|
| GNSS | No | No | No | No |
| Bluetooth | No | No | No | Yes |
| Wi-Fi | No | No | No | Yes |
See Also
References
- ↑ 1.0 1.1 1.2 R5 Datasheet EMEA. Retrieved 27.02.2025.
- ↑ 2.0 2.1 R5 Datasheet ASIA. Retrieved 27.02.25.
- ↑ 3.0 3.1 R5 Datasheet LACR. Retrieved 27.02.25
- ↑ 4.0 4.1 R5 Datasheet NORTH AMERICA. Retrieved 27.02.25.